Forum:
Hi All
Problem with the head light dip/full beam switch.(I think ???) Been for a MOT today and on test no full beam,(no power at all to headlight bulbs) checked at home and it was working, but then found after multiple dip/full changes there was the occasion when the lights failed.
Any suggestions out there, is it possible to remove the switch assembly and clean the contacts ( could they be pitted/corroded). I have given it a shot of WD40, but the problem is still there. Any one have a switch assembly for sale.
'91 Fourtrak TDX 2.8
im sure it will just be a
im sure it will just be a case of removing the trim around the steering colum and looking at it from there.
you should probabaly have a look at the fuse too. i would just replace the switch/stalk, wont cost much. there really isnt much else it can be if everything else is working fine
PM me if you need Sportrak Help..
Headlight,dip/full beam switch/ fault
hi ews
as paul says but it is also worth checking the headlamp main relay and if fitted the dim-dip lamp resister
with the main headlamp relay ensure that there continuity between teminals 1-2, 2-3, 3-1
good luck
Have a look at this page:
Have a look at this page: http://www.daihatsu-drivers.co.uk/node/4426
Any veiws expresed in this thread by me are purely from my own experience, and (sometimes) falible memory. Hope my comments help, but please don't take them as gospel.
Thank you Nev. K. I will
Thank you Nev. K. I will check this out. Thanks to you all, for your replies.
Edward (ews)
Edward (ews) '92 Fourtrak 2.8 TDX