DAIHATSU FOURTRAK TDX

Submitted by scott on Fri, 12/03/2010 - 00:24

Posted in

Problems

HI DOES ANYBODY NO THE TORQUE SETTINGS FOR THE CYLINDER HEAD BOLTS PLEASE

Login or register to post comments

117.7 +/- 9.8 Nm

Submitted by svoburner on Fri, 12/03/2010 - 09:03.

From my F70, F75, F77 Service manual:

"Apply engine oil to the threaded portion and seating surface of each bolt"

"Tighten the cylinder head bolts progressively in the sequence as indicated by the illustration" - see link below.

http://www.daihatsu-drivers.co.uk/node/12743
Diesel Head Tightening Sequence

Tightening torque:

117.7 +/- 9.8 Nm
12.0 +/- 1 kgfm

1985 Veg oil burning Fourtrak "Rocky".

Login or register to post comments

Foot pounds

Submitted by rf man on Fri, 12/03/2010 - 09:33.

To get foot pounds, multiply Nm by 0.738

Login or register to post comments

Torque settings

Submitted by ews on Fri, 12/03/2010 - 23:51.

I think possibly your Torque wrench may have Foot pounds and Newton metres indicated on the shaft adjuster. Well the two I have do, a 1/2" drive and 3/4" drive, but they are many years old. Take a look .

Edward (ews) '92 Fourtrak 2.8 TDX

Login or register to post comments