Submitted by joanne73 on Wed, 10/03/2010 - 10:52
Posted in
Hi folks, ive not been on here for a while but since my last post of Zeebra 3's modifications ive now had some more done which i want to share with you fellow Hijetters out there.
Firstly ive had the old 1300cc petrol catalyst exhaust removed and replaced with a stonking full through sports stainless steel system with a lovely oval/squared tail end pipe It sounds absolutely evil and it dont half growl when you accellerate hard!!!
It was done by Bells exhausts & tyre centre in OLD TOWN SWINDON WILTSHIRE and it cost me
Induction kit help
Hi Brendan, nice van mate...When i saw this little van i could see that there was no other choice but to buy one and seeing yours only confirmed the idea. Mines a 52 reg with petrol and LPG. Ive been trying to work out how to put a pod filter on it but havent been able to find a suitable pipe. I was wondering if you could give me a few hints. Like where i could source a pipe from. The existing plastic pipe runs from the throttle body with a 90 degree turn to the air box. Before it gets to the airbox there is a hole for the air flow sensor on the top then a bigger pipe on the bottom that goes to another box (not sure what thats for). Then on the other side of the airbox there is a smaller pipe that goes foreward to something else. It all seems a bit complicated to me. Anyway, if you could help with some photos of your setup or an idea of where to get a pipe, or even just tell me what all the extra bits are for that would help alot. Cheers